Turbo Tel's pictures

Mar 18th 2007 Red Engines go Faster!!

Carried on assembling the Engine. Nothing unusual, all went together with no problems. Decided to mount the Edis coil pack on the clutch housing with the Edis module under the dash. Its time to pull the old engine out, recover a few parts and install the new engine. Did just that and now its just a matter of fabricating a manifold and downpipe..and a sensor bracket ...and....and.... Made an executive decision to leave out the Intercooler and dump valve until the engine is run in This is going to save time and money and until its run in I couldn't use it all anyway. The GT15 has an 8psi Actuator`and that should be plenty for now.

Back to engine page